FAQs
How do I set up a project?How far should I leave between sensors when monitoring my network?When would I use a 5 minute, 30 minute or 1 hr session?When would I use a 24 hour session?When would I use an overnight session?When would I use System mode?When would I use Sounding lite?When would I use Consumption Profiling?When would I correlate?How do FIDO sensors know if there is a leak?What is the process to investigate a Waypoint?What do I do if I forget my password?What does a leak look like on a session graph?
Hardware
The FIDO sensor
FIDO Relay Unit
Leak Locate
Working on Waypoints
Choosing a Sampling Session
Carrying out Correlations
Sounding Lite and Top Sounding
Consumption Profiling
Network Monitor
Deploying FIDO Sensors and Relay Units for Fixed Network Monitoring
View Your Network Monitoring Results
Relay LED light, Colour & Pattern Guide
🏠
Feedback
🎞️
Help Videos
    Home
  1. FAQs
  2. When would I use a 5 minute, 30 minute or 1 hr session?

When would I use a 5 minute, 30 minute or 1 hr session?

Written By Gareth Lloyd

Short sessions are ideal to check if the leak noise is still present when you get to site. If the leak noise is not audible because of high usage on the network or other interference, then correlations will be unsuccessful and you will need to come back when the noise is clearer.

Was this helpful?